Продукція

netPower 16P

An outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere!

Зацікавив пристрій?

Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.

Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps.

netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.

Device itself does not have an onboard voltage converter. You need 24V PSU to have 24V PoE out and/or 48V PSU to have 48V PoE out (IEEE 802.3 at/af).

* Power supply is NOT included with the product. You are welcome to use your preferred power option, like battery pack etc. Compatible also with MikroTik power supplies 24HPOW, MTP250-53V47-OD, MTP250-26V94-OD, 48POW and 48V2A96W

Specifications

Product code CRS318-16P-2S+OUT
Architecture ARM 32bit
CPU 98DX226S
CPU core count 1
CPU nominal frequency 800 MHz
Switch chip model 98DX226S
Dimensions 303 x 212 x 78 mm
RouterOS license 5
Operating System RouterOS / SwitchOS
Size of RAM 256 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 200'000 hours at 25C
Tested ambient temperature -40°C to 70°C

Powering

Number of DC inputs 2 (DC jack)
DC jack input Voltage 18-30 V / 48-57 V
Max power consumption 316 W
Max power consumption without attachments 16 W
Cooling type Passive

PoE-out

PoE-out ports Ether1-Ether16
PoE out 802.3af/at
Max out per port output (input 18-30 V) 1.1 A
Max out per port output (input 30-57 V) 0.6 A
Max total out (A) 2.8A (18V-30V) & 1.4A (48V-57V) x2

Ethernet

10/100/1000 Ethernet ports 16
Number of 1G Ethernet ports with PoE-out 16

Fiber

SFP+ ports 2

Other

CPU temperature monitor Yes
Voltage Monitor Yes

Certification & Approvals

Certification CE, EAC, ROHS
IP IP54
Brochure Перейти
Quick Guide Перейти
User Manual Перейти
RouterOS current release Перейти
RouterBoot firmware Перейти
Block Diagram Перейти
Mounting template Перейти
SFP compatibility list Перейти
RouterOS software manual Перейти
SwOS software manual Перейти
Declaration of conformity Перейти

Switching results

CRS318-16P-2S+OUT
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 2,925.9 35,531.9 8,458.6 34,646.6 53,571.4 27,428.6
Switching Non blocking Layer 2 capacity 2,925.9 71,063.7 8,458.6 69,293.2 53,571.4 54,857.1
Switching Non blocking Layer 1 throughput 2,925.9 36,000.0 8,458.6 36,000.0 53,571.4 36,000.0
Switching Non blocking Layer 1 capacity 2,925.9 72,000.0 8,458.6 72,000.0 53,571.4 72,000.0

Ethernet test results

CRS318-16P-2S+OUT98DX226 all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)104,11264.2119,1487.8141,172.2
Bridging25 bridge filter rules59,7725.059,7244.570,436.0
Routingnone (fast path)104,11264.2129,7531.3143,573.5
Routing25 simple queues56,7688.657,9237.265,233.4
Routing25 ip filter rules44,1535.645,6186.848,424.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

У комплекті