Продукція

CRS328-4C-20S-4S+RM

Smart Switch, 20 x SFP cages, 4 x SFP+ cages, 4 x Combo ports (Gigabit Ethernet or SFP), 800MHz CPU, 512MB RAM, 1U rackmount case, Dual Power Supplies, RouterOS L5 or SwitchOS (Dual Boot)

Зацікавив пристрій?

The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.

The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands.

The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.

Specifications

Product code CRS328-4C-20S-4S+RM
Architecture ARM 32bit
CPU 98DX3236
CPU core count 1
CPU nominal frequency 800 MHz
Switch chip model 98DX3236
Dimensions 443 x 194 x 44 mm
RouterOS license 5
Operating System RouterOS / SwitchOS
Size of RAM 512 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 200'000 hours at 25C
Tested ambient temperature -20°C to 60°C

Powering

Number of AC inputs 2
AC input range 100-240
Number of PSU slots 2
Frequency (Hz) 50-60
Max power consumption 43 W
Cooling type 2 fans

Ethernet

Ethernet Combo ports 4

Fiber

SFP ports 20
SFP+ ports 4

Peripherals

Serial console port RJ45

Other

CPU temperature monitor Yes
Voltage Monitor Yes
Mode button Yes

Certification & Approvals

Certification CE, EAC, ROHS
Brochure Перейти
Quick Guide Перейти
User Manual Перейти
RouterOS current release Перейти
Dimensions Перейти
Block Diagram Перейти
SFP compatibility list Перейти
RouterOS software manual Перейти
SwOS software manual Перейти
Declaration of conformity Перейти

Switching results

CRS328-4C-20S-4S+RM
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 5,201.6 63,167.8 15,037.6 61,594.0 95,238.1 48,761.9
Switching Non blocking Layer 2 capacity 5,201.6 126,335.5 15,037.6 123,188.0 95,238.1 97,523.8
Switching Non blocking Layer 1 throughput 5,201.6 64,000.0 15,037.6 64,000.0 95,238.1 64,000.0
Switching Non blocking Layer 1 capacity 5,201.6 128,000.0 15,037.6 128,000.0 95,238.1 128,000.0

Ethernet test results

CRS328-4C-20S-4S+RM98DX3236 all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)104,31266.6273,51120.3449229.9
Bridging25 bridge filter rules1041263.0104,6428.4104,553.5
Routingnone (fast path)104,31266.6273,91121.9343,5175.9
Routing25 simple queues104,31266.6136,9560.7137,470.3
Routing25 ip filter rules64,8786.965,9269.965,833.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

У комплекті